poe-table

This command configures the Power Over Ethernet Settings table, which lets you enable power on the Ethernet lines (PoE).

Syntax

(config-network)# poe-table < Index >
(poe-table-<Index>)# < Command >

Command	Description
port-at-enable {disable|enable}	Enables PoE according to IEEE 802.3at.
port-enable {disable|enable}	Enables PoE port.
port-max-power	Configures the PoE port's maximum power.

Command Mode

Privileged User

Note

This command is applicable only to Mediant 800 MSBR.

Example

This example enables PoE on port 0:

(config-network)# poe-table 0
(poe-table-0)# port-enable enable
(poe-table-0)# port-max-power 4000